Warm-a-Wall

Sale Prices  (Available Soon)

ALL PRICES EXCLUDE VAT & CARRIAGE

With higher fuel costs insulation is the solution

Don't throw money away having heat escaping through walls!

Install

Warm-A-Wall

The sensible answer to rising fuel costs.

The new thermal and acoustic wall lining made from recycled polyurethane

• Easy to install 28% imporvement in energy efficiency
• Helps reduce condensation
• Stops unsightly mould growth
• Skim plastered to give a more traditional and robust finish
• Deals with waste disposal issue
• Re-cycled product helping the environment
• Helps save CO2 emissions
• Solid wall u-value 2.1 brought down to 1.51

Warm-A-Wall IS A NEW FORM OF
INSULATION ON A ROLL

It is applied to the wall like wallpaper
then skim finished to give it a permanent
finish. It can be used on any external wall
to increase the insulation value even

WARM-A-WALL

THERMAL/ACOUSTIC WALL LINING THERMAL INSULATION FOR WALLS AND CEILINGS APPLICATION INSTRUCTIONS

1. Prepare wall surface. Wallpaper is to be removed before application. Artex ceilings should be sanded down prior to Warm-a-wall installation. Walls with mould growth problems must be first washed and disinfected clean and allowed to dry. If surface is porous apply Warm-a-Wall basecoat primer.
   
2. Cut Warm-a Wall lining to size in strips as would be done with normal wallpaper.
   
3. Apply Warm-a-Wall adhesive to the wall / ceiling surface area or to the foam side of the Warm-a-Wall material. Fix each strip of Warm-a-Wall firmly and securely in place. Continue with each length until all the required area is covered.
   
4. When working around obstacles such as skirtings, electrical sockets, light switches etc., utilise Warm-a-Wall trims to provide protection around the edge.
   
5. Any gaps should be filled with Warm-a-Wall filler.
   
6. Warm-a-Wall can be normal plaster skim finished, minimum 3mm thickness giving a more robust traditional surface or emulsioned in the normal way using brush or roller. If plaster skimmed, joints should be scrimmed with normal scrim material/tape.
   
7. For areas of high humidity we recommend a suitable washable mould resistant emulsion.
8. Warm-a-Wall is a unique recycled product that can be plaster skim finished to give a traditional robust surface. It can be used as a sustainable way of renovating and up-grading all unsightly walls or ceilings to prevent condensation problems eliminating cold spots a particular problem on some ceilings and most importantly saving energy.
9. Warm-a-wall can be applied by our national network of approved applicators. An added benefit is to thermally up-grade when household decoration is taking place.
   Or DIY is optional.

Call 0870 803 2271

Email enquiries@dry-wall.co.uk